Table of Contents
Advertisement
Power Installation and PCI Fan Speed Controller Installation
Figure 1
Disassemble the turn knob, bolt and fan speed controller from
the 3.5" bracket and reassemble these parts onto a PCI bracket
in sequence.
Figure 1-1
Figure 1-2
Figure 2
Place the PCI bracket with the fan speed controller in the
selected PCI slot. Use screws to secure the PCI bracket in
Figure 2-1
place.
Figure 3
Repeat the steps in "Power Installation and 3.5" Fan Speed
Controller Installation (Figure 2-1~Figure 4-2)".
Figure 3-1
The installation is now completed.
- 8 -
GH-PDU21-MF
Advertisement
Chapters
Table of Contents
