Intel Motherboard Raptor AT Installation Manual page 8

Raptor AT – Installation Guide
Appendix A - Technical Specifications
A complete listing of all the major technical specifications of
the Raptor AT is provided.
Appendix B - Flash BIOS Programming (optional)
Provides all the information necessary to program your
optional AMIBIOS Flash BIOS.
Appendix C - Disk-on-Chip
Two on-board sockets for a solid state flash disk device.
Appendix D - Industrial Devices
Watchdog Timer and On-Board POST (Power On Self
Testing) code display.
Appendix E - Ethernet
On-board 10/100 Ethernet.
Static Electricity Warning!
The Raptor AT has been designed as rugged as possible but can still be
damaged if jarred sharply or struck. Handle the motherboard with care.
The Raptor AT also contains delicate electronic circuits that can be
damaged or weakened by static electricity. Before removing the Raptor
AT from its protective packaging, it is strongly recommended that you
use a grounding wrist strap. The grounding strap will safely discharge
any static electricity build up in your body and will avoid damaging the
motherboard. Do not walk across a carpet or linoleum floor with the
bare board in hand.
VI