Intel Motherboard Raptor AT Installation Manual page 74

Raptor AT – Installation Guide
Checkpoint
Code
The adaptor ROM had control and has now returned
98h control to BIOS POST. Performing any required
processing after the option ROM returned control.
Any initialization required after the option ROM test has
99h completed. Configuring the timer data area and printer
base address next.
Set the timer and printer base addresses. Setting the RS-
9Ah
232 base address next.
Returned after setting the RS-232 base address.
9Bh Performing any required initialization before the
Coprocessor test next.
Required initialization before the Coprocessor test is
9Ch
over. Initializing the Coprocessor next.
Coprocessor
9Dh
initialization after the Coprocessor test next.
Initialization after the Coprocessor test is complete.
Checking the extended keyboard, keyboard ID, and
9Eh
Num Lock key next. Issuing the keyboard ID command
next.
A2h Displaying any soft errors next.
The soft error display has completed. Setting the
A3h
keyboard typematic rate next.
The keyboard typematic rate is set. Programming the
A4h
memory wait states next.
Memory wait state programming is over. Clearing the
A5h
screen and enabling parity and the NMI next.
NMI and parity enabled. Performing any initialization
A7h required before passing control to the adaptor ROM at
E000 next.
Initialization before passing control to the adaptor ROM
A8h at E000h completed. Passing control to the adaptor
ROM at E000h next.
Returned from adaptor ROM at E000h control.
A9h Performing any initialization required after the E000
option ROM had control next.
Initialization after E000 option ROM control has
AAh
completed. Displaying the system configuration next.
Uncompressing the DMI data and executing DMI POST
ABh
initialization next.
B0h The system configuration is displayed.
B1h Copying any code to specific areas.
64
Description
initialized. Performing any required