Intel Motherboard Raptor AT Installation Manual page 30

Raptor AT – Installation Guide
Primary Display
This option configures the type of video card attached to the
computer. The settings are Mono, CGA40x25, CGA80x25,
VGA/EGA (default) and Absent. Use Absent for systems
without video cards.
Password Check
This option enables password checking every time the system
boots or when you run AMIBIOS Setup. If Always is chosen, a
user password prompt appears every time the computer is turned
on. If Setup is chosen, the password prompt appears if
AMIBIOS is executed. See the Advanced Setup chapter for
instructions on changing a password. The Optimal and Fail-Safe
default is Setup.
BOOT to OS/2
Set this option to Enabled if running OS/2 operating system and
using more than 64 MB of system memory on the motherboard.
The setting is either Yes or No (default).
Wait for <F1> If Error
If this option is set to Enabled, AMIBIOS waits for the user to
press <F1> before continuing. If this option is set to Disabled,
AMIBIOS continues the boot process without waiting for <F1>
to be pressed.
Hit Del Message Display
Set this option to Disabled to prevent the message
from appearing on the first AMIBIOS screen when the computer
boots. The setting is either Disabled or Enabled. The Optimal
and Fail-Safe default setting is Enabled.
20
Hit <DEL> if you want to run Setup