DTR-6.5,5.5_En.book Page 52 Wednesday, July 28, 2004 9:07 AM
First Time Setup —Continued
Changing the TAPE/MD/CDR Display
If you connect an
-compatible Integra MiniDisc
recorder or CD recorder to the TAPE IN/OUT jacks, for
to work properly, you must change this setting.
This setting can only be changed on the AV receiver.
Zone 2
Standby
1
Press the [TAPE] input selector
button so that "TAPE" appears
on the display.
2
Press and hold down the [TAPE]
input selector button (about 3
seconds) to set the display.
Repeat this step to select TAPE, MD, or
CDR.
52
1, 2
(DTR-6.5 shown here)