Integra DTR-5.5 Instruction Manual page 57

DTR-6.5,5.5_En.book Page 57 Wednesday, July 28, 2004 9:07 AM
Basic Operation —Continued
Presetting Radio Stations
Zone 2
Standby
You can store up to 40 of your favorite radio stations as
presets.
1 Tune into the station that you
want to store as a preset.
2 Press the [Memory] button.
The MEMORY indicator appears and
the preset number flashes.
3 While the MEMORY indicator is
displayed (about 8 seconds), use
the Preset [
select a preset from 1 through 40.
In this example, preset #3 is selected.
4
Press the [Memory] button again
to store the station.
The station is stored and the preset
number stops flashing.
Repeat this procedure for all your
favorite radio stations.
Selecting Preset Stations
1
Use the [TUNER] input selector
button to select either AM or FM.
2
Use the Preset [
or the remote controller's CH [+/
–] button to select a preset.
2, 4 3
]/[ ] buttons to
]/[ ] buttons,
Deleting Presets
Zone 2
Standby
1
Select the preset that you want to
delete.
See the previous section.
2
While holding down the [Mem-
ory] button, press the
[Tuning MODE] button.
The selected preset is deleted and its
number disappears from the display.
Displaying Radio Information
2
Zone 2
Standby
1
Press the [Display] button
repeatedly to cycle through the
available information.
Band, preset # &
frequency
Listening mode
2
57