Integra DTR-5.5 Instruction Manual page 51

DTR-6.5,5.5_En.book Page 51 Wednesday, July 28, 2004 9:07 AM
First Time Setup —Continued
Equalizer Setting
This setting is set automatically by the Automatic
Speaker Setup function (see page 39).
Here you can adjust the EQ of individual speakers. The
volume of individual speakers can be set on page 50.
C D Tape
7 8
Phono
+ 10
0
--/---
Input Selector
Macro
1 2
Remote Mode
1
Receiver
DVD
Tape
T V VCR
Dimmer
2, 3
TV
Input
+
CH
Disc
-
Prev
CH
Display
Rec
1 Press the [Receiver] button fol-
lowed by the [Setup] button.
Receiver
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "2. Speaker
Setup," and then press [Enter].
Enter
The Speaker Setup menu appears.
Menu
------------------------
Basic Setup
2.Speaker Setup
1.Initial Setup
------------------------
2.Speaker Setup
1.Speaker Config
Enter
2.Speaker Distance
Advanced Setup
3.Level Calibration
3.Surround Setup
4.Equalizer Settings
4.Audio Adjust
5.Listening Mode Preset
6 P
3
Use the Up and Down [
buttons to select "4. Equalizer
Settings," and then press [Enter].
Enter
The Equalizer Settings menu appears.
Enter
Tuner
9
TV VOL
Clear
3
Zone 2
C D MD/CDR
Cable SAT
Sleep
2–7
VOL
Enter
1, 8
Muting
Random
]/[ ]
f
]/[ ]
4
Use the Left and Right [
buttons to select:
Off: Tone off, response flat.
Enter
Auto: The tone for each speaker is
set automatically by the Auto-
matic Speaker Setup function.
Manual: You can adjust the EQ of each
speaker manually.
If you select Manual, continue with this
procedure. If you select Off or Auto, go
to step 8.
5
Use the Down [
select a speaker.
Menu
Enter
------------------------
Basic Setup
2.Speaker Setup
1.Initial Setup
------------------------
2.Speaker Setup 1.Speaker Config
2-4.Equalizer Settings
2.Speaker Distance
Use Settings
Advanced Setup
3.Level Calibration
------------------------
3.Surround Setup
4.Equalizer Settings
4.Audio Adjust
a. 80Hz
5.Listening Mode Preset
b. 250Hz
6.Preference
c. 800Hz
d.2.5kHz
e. 8kHz
6
Use the Up and Down [
buttons to select a frequency,
and then use the Left and Right
Enter
[ ]/[ ] buttons to adjust the
level at that frequency.
The volume at each frequency can be
adjusted from –12 to +12 dB in 1 dB
steps.
Tip: Low frequencies (e.g., 80Hz)
affect bass sounds; high frequencies
(e.g., 8kHz) affect treble sounds.
7
Use the Up [
"Left," and then use the Left and
Right [ ]/[
another speaker.
Repeat steps 6 and 7 for each speaker.
8
Press the [Setup] button.
The setup menu closes.
Notes:
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
]/[ ]
] button to
:Manual
Left
: 0dB
: 0dB
: 0dB
: 0dB
: 0dB
]/[ ]
] button to select
] buttons to select
51