Integra DTR-5.6 Instruction Manual page 65

DTR-5.6.book Page 65 Thursday, September 22, 2005 5:07 PM
Advanced Setup —Continued
Subwoofer Mode
This setting is not set automatically by the Automatic
Speaker Setup function (see page 37).
With this setting, you can boost bass output by feeding
front left and right channel bass sounds to the subwoofer.
This setting can only be made if the Subwoofer setting in
step 4 is set to Yes, and the Front setting in step 5 is set
to Large.
11
Use the Up and Down [
buttons to select "h. Subwoofer
Mode," and then use the Left and
Right [
LFE only: The subwoofer only outputs
the LFE channel.
Double Bass: In addition to LFE chan-
nel sounds, the subwoofer outputs front
left and right channel bass sounds.
12 Press the [Setup] button.
Setup closes.
Note:
• These procedures can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
Speaker Distance
These settings are set automatically by the Automatic
Speaker Setup function (see page 37).
With these settings, you can specify the distance from
each speaker to the listening position.
1 Press the [Receiver] Remote
Mode button, followed by the
[Setup] button.
The main menu appears onscreen.
]/[ ]
]/[ ] buttons to select:
2
Use the Up and Down [
buttons to select "3. Speaker
Setup," and then press [Enter].
The Speaker Setup menu appears.
3
Use the Up and Down [
buttons to select "Speaker Dis-
tance," and then press [Enter].
The Speaker Distance menu appears.
3-3.Speaker Distance
------------------------
a.Unit
b.Front
c.Center
d.Surround R
e.SurrBack R
f.SurrBack L
g.Surround L
h.Subwoofer
Note:
Speakers that you set to No or None on
the Speaker Config menu (page 63)
cannot be selected.
4
Use the Up and Down [
buttons to select "a. Unit," and
then use the Left and Right
[ ]/[ ] buttons to select:
feet: Select if you want to enter
distances in feet. Can be set
from 1 to 30 feet in 0.5-foot
steps.
meters: Select if you want to enter
distances in meters. Can be
set from 0.3 to 9 meters in
0.15-meter steps.
5
Use the Up and Down [
buttons to select each speaker
and then use the Left and Right
[ ]/[ ] buttons to specify the
distance.
Specify the distance from the speaker
to your listening position.
]/[ ]
]/[ ]
:feet
:12.0ft
:12.0ft
: 7.0ft
: 7.0ft
: 7.0ft
: 7.0ft
:12.0ft
]/[ ]
]/[ ]
65