DTR-5.6.book Page 59 Thursday, September 22, 2005 5:07 PM
Adjusting the Listening Modes
Receiver
Enter
Using the Cine Filter Function
With the Cine Filter function, you can correct a
soundtrack whose high-frequency content is too harsh,
making it more suitable for home theater viewing.
This function can be used with the following listening
modes: Dolby Digital, Dolby Digital EX, Dolby Pro
Logic II Movie, Dolby Pro Logic IIx Movie, DTS, DTS-
ES, DTS Neo:6 Cinema, DTS 96/24, and Multichannel.
1
Press the [Receiver] Remote
Mode button, followed by the
[Cine Fltr] button.
Press the [Cine Fltr] button again to
turn off the Cine Filter function.
Audio Adjust Menu
The Audio Adjust menu has various settings for adjust-
ing the sound and listening modes.
1
2
Setup
Cine Fltr
3
L Night
4
5
Press the [Receiver] Remote
Mode button, followed by the
[Setup] button.
The main menu appears onscreen.
Use the Up and Down [ ]/[ ]
buttons to select "6. Audio
Adjust," and then press [Enter].
The Audio Adjust menu appears.
6.Audio Adjust
------------------------
1.Tone Control
2.PL x/Neo:6
3.Dolby Digital
4.LFE Level
5.Mono/Multiplex
Use the Up and Down [ ]/[ ]
buttons to select a setting, and
then press [Enter].
The menu for the selected setting
appears.
Use the Up and Down [ ]/[ ]
buttons to select an option, and
use the Left and Right [
]/[
buttons to change it.
The Audio Adjust settings are
explained on the next page.
When you've finished, press the
[Setup] button.
Setup closes.
]
59