Operating Your Programmed Remote Controller; Dvd Mode (Dvd Player Mode); Vcr Mode (Vcr Mode); Tv Mode (Tv Mode) - Integra DTR-5.3 Instruction Manual

Operating your programmed remote controller

After entering a pre-programming by following the procedure
given above, the following modes become enabled for use.
CH
TV/VCR
TV Mode
TV
CH
TV/VCR
68

DVD Mode (DVD Player Mode)

Operations are the same as explained on page 64.

VCR Mode (VCR Mode)

1. Press the VCR Mode button.
2. Press the desired operation button.
VCR Mode
VCR
The buttons given below have operations programmed
into them.
VCR : Turns on and off the VCR (and switches to the VCR mode)
VOL
CH
TV/VCR: Switches VCR input setting
Muting
: Stop
Video cassette
recorder
operation
buttons
: Pause
0, 1 to 9, +10: Numeric keys
You may also use the following buttons:
Numeric keys
VOL
Muting: Activates muting function at DTR-6.3/5.3

TV Mode (TV Mode)

1. Press the TV Mode button.
2. Press the desired operation button.
The buttons given below have operations programmed
into them.
TV : Turns on and off the television (and switches to the TV mode)
VOL
CH
TV/VCR: Switches television input setting
Muting
0, 1 to 9, +10: Numeric keys
Enter: Confirm
VOL
Muting: Activates muting function at television
Numeric keys
Enter
The VCR button lights green.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your VCR.
: Changes selected preset channel
: Play
: Rewind
: Fast Forward
: Adjusts volume at DTR-6.3/5.3
The TV button lights green.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your television.
: Changes television channel
: Adjusts volume at television