Operating Your Programmed Remote Controller; Dvd Mode (Dvd Player Mode); Sat Mode (Satellite Tuner Mode); Cable Mode (Cable Mode) - Integra DTR-7.3 Instruction Manual

Operating your programmed remote controller

After entering a pre-programming by following the procedure
given above, the following modes become enabled for use.
On
ENTER,
CH
On
CH

DVD Mode (DVD Player Mode)

Operations are the same as explained on page 62.

SAT Mode (Satellite Tuner Mode)

1. Press the SAT/MD Mode button.
The SAT/MD Mode button lights.
Standby
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
SAT/MD Mode
buttons that can be used to control your satellite tuner unit.
The buttons given below have operations programmed
into them.
On: Turns on and off satellite tuner unit (same as Standby button on
VOL
the remote controller)
CH
Menu
Muting
ENTER: Confirms selection
Menu: Displays menu
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL
Muting: Activates the muting function at the DTR-7.3
Numeric keys
Enter

Cable Mode (Cable Mode)

1. Press the Cable Mode button.
The CABLE button lights.
Standby
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your cable TV unit.
Cable Mode
The buttons given below have operations programmed
into them.
On: Turns on and off cable TV unit (same as Standby button on the
VOL
remote controller)
CH
Muting
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL
Muting: Activates the muting function at the DTR-7.3
Numeric keys
Enter
: Changes selected preset channel
: Moves cursor
: Adjusts the volume at the DTR-7.3
: Changes selected preset channel
: Adjusts the volume at the DTR-7.3
67