Cooktop Lockout Relay; Upper Oven Door Hinge - GE Profile PB975 Technical Service Manual

Upper Oven Door Hinge

Each upper oven door hinge is attached to the
frame with two T-20 Torx screws. To replace it
requires removing the upper oven door (See
.), then removing the side panel
Oven Door Assembly
(See ).
Side Panel Removal.

Cooktop Lockout Relay

When an oven is set to Self Clean, the cooktop
controls will lock out. The cooktop cannot be used
when an oven is set to Self Clean.
The cooktop lockout relay is attached to the back
of the range with two ¼-in. hex-head screws. To
replace it requires removing the rear cover. (See
.) Mark and disconnect wires from the
Cover Removal
relay.
Upper
Rear
– 45 –