Decorative Glass & Glass Bead Installation - Vermont Castings VC31LDVINTSC Installation And Operating Instructions Manual

VC31LDVI/VC31CDVI Gas Fireplace Insert
DeCORAtIVe GlAss & GlAss BeAD
INstAllAtION
Use caution when handling glass.
1. Remove glass frame using the cam tool supplied with
unit.
NOte: The unit is designed to use 2/3 of the glass pro-
vided. The remaining decorative glass is intended for
future use.
2. Mix the two (2) bags of decorative glass provided in
the kit as desired. Lay glass on top of burner and cover
burner area with one (1) layer. Glass may be used
around the perimeter next to the wall. Make sure glass
is not blocking gaps between perimeter bracket and the
burner. Keep glass behind retaining flange. Figure 29
Gap
Figure 29
24
DeCORAtIVe GlAss INstAllAtION
3. Place the glass beads on glass randomly as desired.
Figure 29
4. Replace glass frame assembly.
Installation is complete.
FP2987
glass beads
FP2987
20304166