Table of Contents
Advertisement
Scan and copy (cont.)
Problem
The recording paper is jammed.
Even after clicking the Cancel
button, scanning continues.
I cannot scan documents using
other applications.
Error message
Problem
"Initializing ended in failure" is
displayed.
Print quality
Problem
The printing quality is poor.
The printing is faint.
Original
AB C
A dirty pattern or a black line
appears on the printouts.
≥Remove the jammed recording paper and reset it, then try again.
≥Wait. Sometimes, it takes a while for the cancel request to be
accepted.
≥Due to compatibility issues, an error may occur when you scan
documents using certain applications. Scan from PANA LINK.
≥Reconfirm the connection of the PC and the fax machine.
≥The setting of the PC LINK on the fax machine is off. Turn it on
(p. 34).
≥Some paper has instructions recommending which side to print on.
Try turning the paper over.
≥You may have used paper with a cotton and/or fiber content that is
over 25 %, such as letterhead or resume paper.
Copy
≥The remaining toner is low. Replace the toner cartridge.
≥There are scratches on the drum unit. Replace the drum unit.
Troubleshooting
Cause & Remedy
Cause & Remedy
Cause & Remedy
39
Advertisement
Table of Contents
