Table of Contents
Advertisement
PC Fax
Sending documents created on the
Sending a document created by an application as a fax
message
You can access the fax function from a Windows application by using the Print command in the File menu.
Select PANA LINK FAX as the active printer.
For example, to send a document created from Microsoft Word, proceed as follows.
1
Open the document you want to send.
2
Select Print from the File menu.
≥The Print dialog box will appear.
3
Select PANA LINK FAX as the active printer.
Click [OK] in the Print dialog box.
4
≥If the PANA LINK application has not started
yet, it will start now, and then one item is
added to it as the transmission document.
Note:
≥If the line is busy or there is no answer, the PANA LINK Fax will automatically redial the number up to
5 times.
≥To cancel transmission after dialing, click [STOP] in the main panel or press (STOP) on the fax machine.
≥If you send a fax using a PC, the FaxSav service cannot be used.
18
PC!
5
Set the fax number you want to send the
document to.
≥To set the telephone number, you can use
the keypad, one-touch dialing or the address
book.
Keypad
Address book
Click [START] in the main panel.
6
≥The document will be sent.
One-touch
dialing
Advertisement
Table of Contents
