Table of Contents
Advertisement
FLM 600/650 Scanner 32
The FLM 600/650 Scanner dialog box is displayed when you click the Scan button on the PANA LINK Main
panel.
1
2
3
You can set up the following items to make an image file better.
1 Image Quality: You can set the image quality to scan.
Fine (200 x 200 dpi):
Line art (400 x 400 dpi): For a document with complicated graphics or very small text. (400 x 400 dpi:
2 Image Type: You can set the image type to scan.
Auto:
Sets the image type automatically.
Text:
For a text document. (We recommend this as a default.)
Photo: For a photograph.
4 Status: shows the current state of the unit.
The following messages are displayed depending on the state of the unit.
Message
Ready
Please insert document to
scan.
Scanning
FLM600/650 unit power is off.
Plug the unit in and try again.
FLM600/650 is warming up.
5
For a text document with small writing or a document with a simple graphic.
interpolated)
A document is set on the unit. Please click the Scan button for
scanning.
A document is not set on the unit. Please set a document on the feeder
tray.
The unit is scanning a document.
The power of the unit is off or unplugged, or the PC is not connected
to the FLM600/650. Please verify above.
The unit is warming up. Please wait for a while.
6
7
State
Scanning
4
29
Advertisement
Table of Contents
