D Receiving A Polling Request Call - Icom IC-M505 Instruction Manual

6
DSC OPERATION

D Receiving a polling request call

While monitoring Channel 70 and a polling request call is
received:
➥ "Received POLL REQ" appears in the display.
➥ Push [CLR] to stop the beep, then push [CHANNEL•
ENTER] to reply to the call; push [CLR] to ignore the call.
Received
POLL REQ
<Paul
<CLR ˘
Beep Off>
D Receiving a position request reply call
While monitoring Channel 70 and a position request reply
call is received:
➥ "Received POS Reply" appears in the display.
➥ Push [CLR] to stop the beep, then push [CHANNEL•
ENTER] to display the position information; push [CLR] to
ignore the reply call.
Received
POS Reply
<Paul
<CLR ˘
Beep Off>
44
25W INT
TAG
SAFETY
25W INT
TAG
SAFETY
D Receiving a position report reply call
While monitoring Channel 70 and a position report reply call
is received:
➥ "Received POS Reply" appears in the display.
➥ Push [CLR] to stop the beep, then push [CHANNEL•
ENTER] to display the position information; push [CLR] to
ignore the reply call.
25W
TAG
Received
POS Reply
<Paul
<CLR ˘
Beep Off>
D Receiving a polling request reply call
While monitoring Channel 70 and a polling request reply call
is received:
➥ "Received POLL Reply" appears in the display.
➥ Push [CLR] to stop the beep, then push [CHANNEL•
ENTER] to display the position information; push [CLR] to
ignore the reply call.
25W
TAG
Received
POLL Reply
<Paul
<CLR ˘
Beep Off>
INT
SAFETY
INT
SAFETY