D Transmitting A Position Request Call - Icom IC-M505 Instruction Manual

6
DSC OPERATION
t After the all ships call has been transmitted, the following
indication is displayed.
y Push [CLR] to exit and the transceiver selects Channel
16 automatically.
• Even if [CLR] hasn't been pushed, the transceiver automati-
cally selects Channel 16 after 2 sec. of inactivity.
32
--DSC Menu--
All Ships Call
TX Complete
<CLR˘Exit>

D Transmitting a position request call

Transmit a position request call when you want to know a
specific ship's current position, etc.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select "Position Request,"
push [CHANNEL•ENTER].
--DSC Menu--
Select Item
Position Input
Individual Call
Group Call
All Ships Call
˘Position Request
Position Report
e Rotate [CHANNEL] to select the desired pre-pro-
grammed individual address or "Manual Input," push
[CHANNEL•ENTER].
• The ID code can be set in advance. (p. 17)
• When "Manual Input" is selected, set the 9-digit MMSI
number for the individual you wish to call by rotating [CHANNEL].