Harness Removal And Assembly - Baby Trend EuroSport Owner's Manual

Operation and Adjustments
10.0

10.4 Harness Removal and Assembly

Harness Removal:
a. Buckle harness and chest clip to
hold harness system together.
b. Adjust the harness to loosen
harness straps.
c. From the front of Back Support, slide top
corners of Back Support pad off Back
Support exposing harness slots in Back
Support.
d. Remove harness straps from back support
and seat pad:
- From back of car seat, pull the metal
harness retainer on the harness straps
away from the back of the Back Support.
- Rotate the metal harness retainer and
harness strap to position the narrow
side of the metal harness retainer into
the harness slot.
- Push the metal harness retainer through
the harness slot opening in the Back
Support and seat pad.
- Pull the harness strap and metal harness
retainer out through the front of the seat
pad.
- Repeat for other harness strap.
81
Operation and Adjustments
10.0
e. Remove lower end of harness strap
and Crotch Belt.
- From bottom of Seat Base, pull the
metal harness retainer away from the
bottom of the Seat Base.
- Rotate the metal harness retainer and
harness strap to position the narrow
side of the metal harness retainer
into the harness slot.
- Slide the metal plate through the
harness slot opening in the Seat
Base and seat pad.
- Pull the harness strap and metal
harness retainer out through the
top of the seat pad.
- Repeat for other harness strap and
Crotch Belt.
f. Slide back support pad over top corners
of Back Support.
g. Store harness in cool dry location for
future use.
82