Booster Car Seat (Without Built-In Harness System); Installation And Use - Baby Trend EuroSport Owner's Manual

3-in-1 car seat
Table of Contents

Advertisement

Toddler Car Seat
(With
7.0
Harness) Installation and Use
To remove your child:
1. Unbuckle Harness Clip – press on the
tabs in the top and bottom of the Harness
Clip
and pull apart
to open the Harness
2
1
Clip.
2. Unbuckle the Smart Safety Buckle to
open the Harness System
Note: Each time the Smart Safety Buckle
is unbuckled, the safety alarm on
the buckle will sound an audible
"beep" for 5 to 7 seconds.
3. Slide the Harness straps off the child's
shoulders and arms.
4. Remove your child.
Built-in
2
1
2
1
57
Booster Car Seat
8.0
(Without
Built-in Harness)

Installation and Use

WARNING!
DEATH or SERIOUS INJURY can occur:
• Child must be at least 3 years old and
weigh at least 30 lbs. (13.6 kg) to use
the Booster Mode.
• Use only the vehicle's lap/shoulder belt
system when restraining the child in this
Booster Car Seat.
• Never use the Booster Car Seat with
only a vehicle lap belt across front of
child. Using a Booster Car Seat with
only a lap belt could result in serious
injury or death.
• Snugly adjust the lap/shoulder belt
around child according to the instructions
in the vehicle's owner's manual.
- Shoulder belt must be properly
positioned over shoulder (NOT
touching child's neck and NOT
off shoulder).
- Vehicle lap belt must be positioned
low on the hips, contacting the thighs.
- Never use shoulder belt loose,
positioned under child's arm, or
behind child.
58

Advertisement

Table of Contents
loading

Table of Contents