Assembly And Removal For Back Support; Booster Seat Back Angle; Headrest Adjustment - Baby Trend HB40B43A Owner's Manual

Protect 2-in-1 folding booster seat

Table of Contents

6.0 Installation and Use

. Check the fit of the vehicle seat belts on the child:

- Vehicle lap belt must be low on hips

contacting the thighs.

- Vehicle shoulder belt must contact the chest

and be centered on the shoulder. Use the

Shoulder Belt Positioner to adjust the position

of the vehicle shoulder belt.

DO NOT

place vehicle shoulder belt under

child's arm or behind child.

WARNING!

• Discontinue use of Backless Booster when top of child's

ears are above top edge of vehicle head rest and vehicle

seat back.

To remove your child:

Unbuckle vehicle seat belt and remove your child.

6.6 Assembly and Removal for Back Support

To Remove Back:

Press the two release buttons and lift.

To Install:

Align tabs on booster seat back and slide into

place. Pull up on back to ensure seat back is

secured.

- The PROTECT 2-in-1 Folding Booster

Seat seat has a range of motion to match

your vehicle's seats back.

- Push headrest release handles in and

move headrest up or down to desired

position.

6.0 Installation and Use

Table of Contents

Hb40a