Belt Routing Options For Installation; Installation With Top Tether "Front Entry" Belt Routing; Installation With Top Tether - Baby Trend EuroSport Owner's Manual

3-in-1 car seat
Table of Contents

Advertisement

Toddler Car Seat
(With
7.0
Harness) Installation and Use
The belt path routing used to secure this car seat into a
vehicle is dependent on installation
the Top Tether.
- If the Car Seat is installed
WITH
ENTRY" belt routing MUST be used.
- If the Car Seat is installed
WITHOUT
"REAR ENTRY" belt routing MUST be used.
Note: Installation with Top Tether is recommended when a vehicle
tether anchor is available.
a.
Baby Trend requires using the Top Tether provided with this
Car Seat whenever possible.
b.
Installation of a car seat using the Top Tether can make getting
a secure installation easier and can reduce the risk of injury in a
crash. This car seat may be installed without the Top Tether
when a vehicle tether anchor is not available.
See "Belt routing options for installation" section for "FRONT ENTRY"
and "REAR ENTRY" belt routing information.
Built-in
WITH
or
WITHOUT
the Top Tether, the "FRONT
the Top Tether, the
25
Toddler Car Seat
(With
7.0
Harness) Installation and Use

Belt Routing Options for Installation:

7.2
Installation
WITH
Top Tether
"FRONT ENTRY" Belt Routing
The "FRONT ENTRY" belt routing is used to secure the Toddler
Car Seat
(WITH
Harness) when installed
LATCH lower anchor belt and vehicle seat belts are routed through the
"FRONT ENTRY" belt path in the same way.
"FRONT ENTRY" Belt Routing
• Start by sliding the LATCH belt
or vehicle seat belt under the
Armrest
.
1
• From the front of the car seat,
insert the LATCH connector or
the vehicle seat belt latch plate
into the Belt Path Opening in the
Back Support
.
2
• Pull the LATCH or vehicle seat
belt through Belt Path Opening
and across the back of Back
Support to the Belt Path Opening
on the opposite side
.
3
• From the back of the Back Support, insert the LATCH connector or
the vehicle seat belt latch plate into the Belt Path Opening in the
Back Support
.
4
• Pull the LATCH or vehicle seat belt through and slide the belt under
the Armrest on the opposite side
Built-in
WITH
the Top Tether. The
Top
Tether
Back
Support
Belt Path
Openings
Armrest
3
2
4
5
1
.
5
26

Advertisement

Table of Contents
loading

Table of Contents