Chapter 3 Operations In Pelco Mode; Overview; Viewing And Using The Lcd; Viewing The Lcd - Sony Ipela RM-NS1000 User Manual

System controller

Hide thumbs Also See for Ipela RM-NS1000:

Table of Contents

Operations in Pelco Mode

This mode is used for performing pan, tilt, and zoom

controls for Pelco-D or -P protocol cameras connected

directly to the system controller via the RS-485 port.

This chapter describes the following operations in Pelco

mode.

• Viewing and Using the LCD (page 52)

• Switching Modes (page 53)

• Selecting a Camera (page 54)

• Controlling Cameras (page 55)

• Locking Operation (page 56)

• Setting the System Controller to the Off State (page 57)

• Adjusting the Brightness of the LCD (page 57)

• Multi Function Menu (page 58)

Note

For details on the RS-485 pin arrangement, see "I/O Port"

(page 70).

Overview / Viewing and Using the LCD

Chapter

Viewing and Using the

LCD

On the LCD, you can check the current status and operate

the multi function menu.

Top screen

Current mode

Multi function menu

When you have entered the multi function menu

Menu name

Submenu

Note

Code numbers are numbers to help you refer to this guide.

For details on how to use code numbers, see "Screen

Index" (page 63).

Code number

Table of Contents