Protocol
Set the control protocol for Pelco-D or P protocol cameras
in the Protocol menu.
1
Press the
(PROTOCOL) button.
The Protocol screen appears.
2
Press the
(Pelco-D/P) button.
Each press switches between [Pelco-D] and [Pelco-P].
Current setting
A confirmation screen appears.
3
Press the
(OK) button.
The control protocol is set.
Baudrate
Set the baud rate.
1
Select the camera you want to set.
2
Press the
button.
The Baudrate screen appears.
3
Press the button for the baud rate you want to set.
Current setting
A confirmation screen appears.
4
Press the
(OK) button.
The baud rate is set.
59
Multi Function Menu