Table of Contents
Advertisement
Names of Parts
Control Panel
1
A POWER LED
Lights green when the AC adapter is connected to an
outlet.
B
(LOCK) button
Locks or unlocks system controller operation.
For the operating procedure, see "Locking Operation"
(page 41).
C
(PANIC) button
Returns all cameras to preset position 1.
D
(ALARM) button
Used when you use the joystick to select the alarm
history.
E LCD
Used to check the current status and operate each of
the items in the multi function menu.
F Multi function buttons
Used to select/execute each of the items in the multi
function menu.
For the operating procedure, see "Viewing and Using
the LCD" (page 14).
G
(ALL SELECT) button
Selects all monitor frames.
8
Names of Parts
2 3
4
5
qs
qdqfqgqhqjqkqlw;waws
6
7
8
9
wd
wf
H Custom function buttons
Used to access pre-registered functions.
F1: Sets image brightness adjustment to auto mode.
F2: Turns the auto focus on.
F3: Turns the DIRECT operations on or off.
F4 to F8: These buttons are not used.
I Camera preset area
Used to move cameras to preset positions, and
configure preset positions.
(PRESET) button
Moves the selected camera to the preset position.
(SET) button
The current camera position is set as the preset
position.
J Camera control area
Used to control cameras.
For the operating procedure, see "Controlling
Cameras" (page 21).
(CURSOR) button/LED
Sets the joystick to mouse mode.
If mouse mode is set, the joystick can be operated in
the same way as a mouse.
In mouse mode, the LED is lit green.
0
qa
Advertisement
Table of Contents
