Table of Contents
Advertisement
Operations in RM-NS1000
Mode
Overview
RM-NS1000 mode is for when you are operating the
NSR-1000 series or RealShot Manager Advanced.
This chapter describes the following operations in
RM-NS1000 mode.
• Logging On to the System (page 12)
• Viewing and Using the LCD (page 14)
• Switching Modes (page 15)
• Operations in the Main Screen (page 16)
• Selecting a Monitor Frame (page 18)
• Selecting a Camera (page 19)
• Assigning Cameras to Monitoring Frames (page 19)
• Switching between Monitoring Live Images and Playing
Recorded Images (page 20)
• Controlling Cameras (page 21)
• Using Camera Presets (page 24)
• Performing a Camera Tour (page 25)
• Performing a Layout Tour (page 27)
• Outputting Audio to the Camera (page 28)
• Recording, Searching for, and Playing Back Images
(page 29)
• Exporting Recorded Images (page 38)
• Locking Operation (page 41)
• Setting the System Controller to the Off State (page 42)
• Adjusting the Brightness of the LCD (page 43)
• Multi Function Menu (page 44)
Note
In this chapter, mainly the screens of RealShot Manager
Advanced are used for the explanations. These screens are
subject to change without notice.
12
Overview / Logging On to the System
Chapter
Logging On to the System
Turn on the power of the system controller, and log on to
the NSR-1000 series or RealShot Manager Advanced.
Note
A keyboard and mouse are required when logging on to the
NSR-1000 series or RealShot Manager Advanced. If the
user name and password consist only of numbers, you can
use the numeric keypad of the system controller to log on.
When a password is not set for the system
controller
1
Connect the AC adapter of the system controller to an
outlet.
The power of the system controller turns on and the top
screen appears.
2
Log on to the system.
Use the keyboard to enter your user name and
password, and click [Logon].
2
Advertisement
Table of Contents
