Outline Of The Rm-E300 - Sony RM-E300 Operating Instructions Manual

Outline of the RM-E300
The RM-E300 editing controller is used to select and record
desired scenes from an original tape in a desired sequence.
It also allows for superimposing character titles created with
the keyboard and/or a telop card shot with the video camera
recorder onto the tape to be edited. (Only titles cannot be
inserted to the edited tape.)
Use a Sony product for playback, but any desired VCR
can be used for recording.
The cut-in and cut-out points are memorized from the
counter number, so frame editing is impossible.
Use a Sony product that has one of the following
connectors:
& mm Video camera ~ | REMOTE
recorder 5-pin connector
or
stereo mini-
minijack
CONTROL L
5-pin connector
ED Beta format or
Beta format VCR
VHS format VCR
In this manual, the 8 mm video camera recorder is used for
explanations.
Recorder
Use a video product that has
the following connector.
CONTROL L ED Beta or Beta
format VCR 5-pin connector
or
.| VHS format VCR | CONTROLS
2 (CONTROL)
§| 8mm format VCR | minijack
2 pape
>| 8 mm format REMOTE
8 video camera 5-pin connector
recorder or
stereo mini-
minijack
VCR which is operated with an infrared remote
control unit.
Other manufacturers' video products which is operated
with an infrared remote control unit.
(Some VCRs cannot be used with this unit.) |
For connections and the position of each select switch, see
page 10 to 20.
Connect the monitor (or TV) to the recorder.
WHEN YOUR RECORDER IS DESIGNED BASED ON
THE SECAM COLOUR SYSTEM, THE OPTIONAL PAL-
SECAM TRANSCODER IS NECESSARY TO CONNECT
THE RM-E300 AND THE RECORDER.
5