Step-By-Step Configuration - NETGEAR DG834 Reference Manual

Reference Manual for the ADSL Modem Router DG834
10.5.6.0/24
Gateway A
LAN IP
10.5.6.1
DG834
Figure B-1
Note: Product updates are available on the NETGEAR, Inc. web site at
http://kbserver.netgear.com/DG834

Step-By-Step Configuration

1. Configure the DG834 v3 as in the Gateway-to-Gateway procedures using the VPN Wizard
(see "How to Set Up a Gateway-to-Gateway VPN Configuration" on page
to use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows:
Device
DG834 v3
FVL328
a. In Step 1, enter toFVL328 for the Connection Name.
b. In Step 2, enter 22.23.24.25 for the remote WAN's IP address.
a. In Step 3, enter the following:
• IP Address = 172.23.9.1
• Subnet Mask = 255.255.255.0
B-2
VPNC Example
Network Interface Addressing
14.15.16.17 22.23.24.25
WAN IP WAN IP
WAN IP Address
14.15.16.17
22.23.24.25
v2.3, May 2007
Gateway B
FVL328
v3.asp.
LAN IP Address
10.5.6.1
172.23.9..1
NETGEAR VPN Configuration
172.23.9.0/24
LAN IP
172.23.9.1
7-20), being certain
LAN Subnet Mask
255.255.255.0
255.255.255.0