NETGEAR DG834 Reference Manual page 53

• Action
Choose how you want this type of traffic to be handled. You can block or allow always, or you
can choose to block or allow according to the schedule you have defined in the Schedule
menu.
• LAN Users
These settings determine which packets are covered by the rule, based on their source LAN IP
address. Select the desired option:
– Any — all IP addresses are covered by this rule.
– Address range — if this option is selected, you must enter the Start and Finish fields.
– Single address — enter the required address in the Start field.
• WAN Users
These settings determine which packets are covered by the rule, based on their destination
WAN IP address. Select the desired option:
– Any — all IP addresses are covered by this rule.
– Address range —if this option is selected, you must enter the Start and Finish fields.
– Single address — enter the required address in the Start field.
• Log
You can select whether the traffic will be logged. The choices are:
– Never — no log entries will be made for this service.
– Always — any traffic for this service type will be logged.
– Match — traffic of this type that matches the parameters and action will be logged.
– Not match — traffic of this type that does not match the parameters and action will be
logged.
Protecting Your Network
Reference Manual for the ADSL Modem Router DG834
v2.3, May 2007
4-11