NETGEAR DG834 Reference Manual page 101

Figure 7-10
c. Select the Secure in the Connection Security check box.
d. Select IP Subnet in the ID Type menu.
e. In this example, type 192.168.3.1 in the Subnet field as the network address of the DG834
v3.
f. Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the DG834 v3.
g. Select All in the Protocol menu to allow all traffic through the VPN tunnel.
h. Select the Connect using Secure Gateway Tunnel check box.
i. Select IP Address in the ID Type menu below the check box.
j. Enter the public WAN IP Address of the DG834 v3 in the field directly below the ID Type
menu. In this example,
k. The resulting Connection Settings are shown in
3. Configure the Security Policy in the NETGEAR ProSafe VPN Client software:
a. In the Network Security Policy list, expand the new connection by double clicking its
name or clicking on the "+" symbol. My Identity and Security Policy subheadings appear
below the connection name.
Virtual Private Networking (Advanced Feature)
Reference Manual for the ADSL Modem Router DG834
would be used.
22.23.24.25
v2.3, May 2007
Figure 7-10.
7-13