NETGEAR DG834 Reference Manual page 111

3. Fill in the IP Address or FQDN for the target VPN endpoint WAN connection and click Next.
Figure 7-23
4. Identify the IP addresses at the target endpoint which can use this tunnel, and click Next.
Figure 7-24
Virtual Private Networking (Advanced Feature)
Reference Manual for the ADSL Modem Router DG834
Enter the LAN IP settings of the remote
VPN gateway:
• IP Address (e.g., 192.168.3.1)
• Subnet Mask (e.g., 255.255.255.0)
v2.3, May 2007
Enter the WAN IP address of the
remote VPN gateway: (e.g.,
22.23.24.25)
7-23