NETGEAR DG834 Reference Manual page 162

Reference Manual for the ADSL Modem Router DG834
c. Click Show Status. The resulting screen should show Update OK: good (see
Figure B-10).
Figure B-10
5. Configure the DG834 v3 as in the Gateway-to-Gateway procedures using the VPN Wizard
(see "How to Set Up a Gateway-to-Gateway VPN Configuration" on page
to use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows:
Device
DG834 v3
FVL328
a. In Step 1, enter toFVL328 for the Connection Name.
b. In Step 2, enter fvl328.dyndns.org for the remote WAN's IP address.
a. In Step 3, enter the following:
• IP Address = 172.23.9.1
• Subnet Mask = 255.255.255.0
6. Configure the FVL328 as in the Gateway-to-Gateway procedures for the VPN Wizard (see
"How to Set Up a Gateway-to-Gateway VPN Configuration" on page
use appropriate network addresses for the environment.
B-12
LAN IP Address
10.5.6.1
172.23.9.1
v2.3, May 2007
7-20), being certain
LAN Subnet Address
255.255.255.0
255.255.255.0
7-20), being certain to
NETGEAR VPN Configuration