Wizard-Detected Dynamic Ip Account Setup; Wizard-Detected Ip Over Atm Account Setup - NETGEAR DG834 Reference Manual

Wizard-Detected Dynamic IP Account Setup

If the Setup Wizard determines that your Internet service account uses Dynamic IP assignment,
you will be directed to the page shown:
Figure 3-12
Click Apply to set Dynamic IP as the connection method.

Wizard-Detected IP Over ATM Account Setup

If the Setup Wizard determines that your Internet service account uses IP over ATM Classical IP
assignment (RFC1577), you will be directed to the page shown:
Figure 3-13
1. Enter your assigned IP Address and Subnet Mask. This information should have been
provided to you by your ISP. You need the configuration parameters from your ISP.
2. Enter the IP address of your ISP's Primary DNS Server. If a Secondary DNS Server address is
available, enter it also.
Configuring Your Internet Connection
Reference Manual for the ADSL Modem Router DG834
v2.3, May 2007
3-11