NETGEAR DG834 Reference Manual page 121

Using the Policy Table on the VPN Policies Page to Deactivate a VPN Tunnel
To use the VPN Policies page to deactivate a VPN tunnel, perform the following steps:
1. Log in to the Modem Router.
2. Open the DG834 v3 management interface and click on VPN Policies to get the VPN Policies
screen (Figure 7-38).
Figure 7-37
3. Clear the Enable check box for the VPN tunnel you want to deactivate and click Apply. (To
reactivate the tunnel, check the Enable box and click Apply.)
Using the VPN Status Page to Deactivate a VPN Tunnel
To use the VPN Status page to deactivate a VPN tunnel, perform the following steps:
1. Log in to the Modem Router.
Virtual Private Networking (Advanced Feature)
Reference Manual for the ADSL Modem Router DG834
v2.3, May 2007
7-33