Manage The Router Configuration File - NETGEAR Orbi Pro SRK60 User Manual

Table of Contents

The user name is admin. The password is the one that you specified the first time that you logged in.

The user name and password are case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Advanced Setup > Traffic Meter.

The Traffic Meter page displays.

Select the Enable Traffic Meter check box.

To control the volume of Internet traffic, use either the traffic volume control feature or the connection

time control feature:

•

Select the Traffic volume control by radio button and then select one of the following options:

No Limit. No restriction is applied when the traffic limit is reached.

Download only. The restriction is applied to incoming traffic only.

Both Directions. The restriction is applied to both incoming and outgoing traffic.

•

Select the Connection time control radio button and enter the allowed hours in the Monthly limit

field.

If your ISP charges for extra data volume when you make a new connection, enter the extra data volume

in MB in the Round up data volume for each connection by field.

In the Traffic Counter section, set the traffic counter to begin at a specific time and date.

To start the traffic counter immediately, click the Restart Counter Now button.

If you want the router to issue a warning message before the monthly limit of Mbytes or hours is reached,

in the Traffic Control section, enter a numeric value.

By default, the value is 0 and no warning message is issued.

10.

To stop the Internet connection when the limit is attained, select the Disconnect and disable the

Internet connection check box.

11.

Click the Apply button.

The Internet Traffic Statistics section helps you to monitor the data traffic.

12.

To update the Internet Traffic Statistics section, click the Refresh button.

13.

To display more information about the data traffic on your router and to change the poll interval, click

the Internet Traffic Status button.