FRS300.MANUAL.qx
10/2/98 12:39 PM
Page 18
Operation
Talking to
Talking To Another Party
Another
To send your outgoing message:
Party
Note
Both units must be on same
channel to communicate.
Turn on your MicroTalk 3 2-way radio.
1
An audible "tone" will indicate the unit is on.
The LCD will go through a 3 second self test
and then go to operational mode.
2
Place antenna in full
upright position.
12
Operation
Note
While PTT button is
depressed you cannot
...
PTT
3
Push and hold
button.
receive incoming calls.
The
i con will appe a r.
4
Note
When you release the
PTT button,the person you
PTT
...
5
Hold mic about
6
Release
button
are talking to will hear a tone
2 inches from
and listen for
indicating that it's ok to talk.
mouth. Speak in
response.
See Talk Confirmation Tone
a normal voice.
section on page 14.
13