Select Main Channel (1-14); Select Ctcss Subchannel (00-38) - Cobra Micro Talk 3 Operating Instructions Manual

FRS300.MANUAL.qx 10/2/98 12:39 PM Page 12
Operation
Select Main

Select Main Channel (1-14)

Channel
Rotate ON - OFF Volume Control
1
An audible "tone" will indicate the unit is on
and then the LCD will go through a 3 second
Note
self-test and then go to operational mode.
Units must be on same
channel and subchannels to
communicate.
Note
Channels 8-12 generally are
less used and give better
results for communications
in most areas.
2 Select channel by pushing and releasing
Note buttons.
Channel
Push and hold the
Channel
buttons for fast channel
advance.
6

Select CTCSS Subchannel (00-38)

clockwise. The CTCSS Subchannel allows the user to utilize
a less used channel range (00-38) within a main
c h a n n e l .
1 Rotate ON - OFF Volume Control clockwise.
An audible "tone" will indicate the unit is on and
then the LCD will go through a 3 second self-test
and then go to operational mode.
2 Select main channel by pushing and releasing
buttons.
Channel
Push and release button. Small numbers
3
Function
flash next to channel display on LCD.
continued
Operation
Select CTCSS
Subchannel
Note
If you push and hold the
Function
button,the LCD display will
cycle through the different
functions.
Note
To return to operational
mode and not save your last
setting push and release
PTT ...
button.
Note
CTCSS (Coded Tone
Controlled Squelch System) is
an advanced subcoding
system that allows
segmentation of a main
channel.
7