Lcd Display; Turning On; Auto Battery Power Saver - Cobra Micro Talk 3 Operating Instructions Manual

FRS300.MANUAL.qx 10/2/98 12:39 PM Page 10
Operation

LCD Display

LCD Display
4
Operation
Turning On Your MicroTalk Turning
On Your
Rotate ON - OFF Volume Control clockwise.
An audible "tone" will indicate the unit is on and MicroTalk 3
then the LCD will go through a 3 second self-test
and then go to operational mode.
Note
Whenever the unit is on you
can receive communications.
Operational Mode

Auto Battery Power Saver

Auto Battery
Your MicroTalk 3 has a unique circuit designed t o
extend battery life. If there are no transmissions Power Saver
within 10 seconds, the unit will automatically
switch to battery save mode.
Note
The Auto Battery Save Circuit
does not effect the unit ' s
ability to receive incoming
transmissions.
The icon will flash.
PWR SAVER
5