Ringer/Vibrate Modes - Cobra Micro Talk 3 Operating Instructions Manual

FRS300.MANUAL.qx 10/2/98 12:39 PM Page 40
Advanced Features
Ringer/Vibrate

Ringer/Vibrate Modes

Modes
Your Microtalk 3 will signal you that there is an
incoming transmission with either a tone or a
vibration or both. To set for Ringer/Vibrate:
1 Rotate ON - OFF Volume Control clockwise.
An audible "tone" will indicate the unit is on and
then the LCD will go through a 3 second self-test
and then go to operational mode.
Push and release button until icon
2
Function
flashes.
34
Advanced Features
3 Push and release buttons until icon
Channel
appears for ringer mode.
continued
35