Cobra Micro Talk 3 Operating Instructions Manual page 4

FRS300.MANUAL.qx 10/2/98 12:39 PM Page 8
Operation
Battery Install Batteries
Installation
1 Clear antenna.
Note
Batteries not included with
MicroTalk 3 2-way radio.
A.
B.
2 Remove belt clip by (A.) pulling tab out and
(B.) Sliding belt clip up and off unit .
2
Operation
Note
Always use high quality
alkaline or NiMH batteries.
Incorrect positioning can
damage both the batteries
and the unit.
Only the Cobra NiMH
battery (Part # FA-BP)
pack can be recharged .
See Accessories on page 47.
Charge ports for recharging
3 Pull lock tab down 4 Insert four "AAA" NiMH (Nickel Metal Hydride)
and lift door up batteries. Position
battery pack are located on
(towards you) to batteries according
back of unit.
remove battery to po l a ri ty marki n g s.
cover. Note
When batteries are low or
need charging the
BATT LOW indicator will
blink. Replace alkaline
batteries or recharge NiMH
battery pack.
3