SOYO SY-K7AIA User Manual page 76

BIOS Setup Utility
PNP/PCI Configuration Setup (Continued)
PNP/PCI Setting
Setup
Interrupt How to set the BIOS to release the IRQ to the PnP Interrupt pool:
Line PnP / PCI configuration
IRQ 15 IRQ 15: PCI / ISA PnP On-Chip Secondary PCI IDE: disabled
IRQ 14 IRQ 14: PCI / ISA PnP On-Chip Primary PCI IDE:
IRQ 12 IRQ 12: PCI / ISA PnP
IRQ 7 IRQ 7:
IRQ 4 IRQ 4:
IRQ 3 IRQ 3:
4. Your OS may reassign another interrupt to a PCI slot after BIOS passes control
to the OS, especially if you use Windows 95, 98 or NT.
Disabled
PCI/VGA
Palette
Enabled
Snoop
Disabled BIOS will assign IRQ for
Assign IRQ
For USB
Enabled
3-7.2 MULTI I/O ADDRESSES
Default settings for multi-I/O addresses are as follows:
Port
LPT1
COM1
COM2
Warning: If a default I/O address conflicts with other I/O cards
such as sound card, you must change one of the I/O addresses to
remedy to this address conflict. (I/O addresses can be adjusted from
the BIOS Setup Utility)
Description
Integrated Peripherals
Interrupt 12 will be released by the PnP
BIOS automatically if the PS/2 Mouse Port
is not used.
PCI / ISA PnP Onboard parallel port: disabled
PCI / ISA PnP Onboard Serial port 1: disabled
PCI / ISA PnP Onboard Serial port 2: disabled
This option will correct color
settings. Most applications do
not need it , we recommend
setting this option to disabled.
USB port.
BIOS won't assign IRQ for
USB port.
I/O Address
378H
3F8H
2F8H
IRQ
7
4
3
72
SY-K7AIA
Note
disabled
Default
Default
Status
ECP/EPP