Hardware Installation
2-3.1 CPU Installation
Your SY-K7AIA motherboard comes with a CPU retention set kit. The
retention set is used to hold the processor attached to the Slot A CPU
connector on the motherboard.
Mark your CPU Frequency:
your CPU that should be clearly marked on the CPU cover.
FSB 100MHz
500MHz (100 x 5.0)
650MHz (100 x 5.0)
Follow these instructions to install your Slot A processor correctly.
Ø
Retention Module
Record the working frequency of
550 MHz (100 x 5.5)
700 MHz (100 x 5.5)
21
SY-K7AIA
600 MHz (100 x 6.0)
750 MHz (100 x 6.0)