SOYO SY-K7AIA User Manual page 48

Hardware Installation
Step 1. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
"Auto".
Step 2. Select [LOAD SETUP DEFAULT]
Select the "LOAD SETUP DEFAULT" menu and type "Y" at the prompt
to load the BIOS optimal setup.
Step 3. Select [SOYO COMBO SETUP]
Move the cursor to the [CPU Frequency] field to see the CPU frequency.
Available [CPU Frequency] settings on your SY-K7AIA Motherboard are
detailed in the following table.
500MHz (100 x 5.0)
650MHz (100 x 6.5)
Note: This is auto detect function. You can see your CPU clock and Ratio,
but that is not adjustable.
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.
CPU Frequency (MHz)
550MHz (100 x 5.5)
700MHz (100 x 7.0)
44
SY-K7AIA
600MHz (100 x 6.0)
750MHz (100 x 7.0)