Advertisement
Available languages
Available languages
1. Adjusting the child seat to suit the weight of your child
IMPORTANT
– This child seat has been designed to perform safely and independently of further external restraint.
Adjusting the Harness
1a
Press in and hold the harness release button and with your hands below the
chest pads
Unfasten the buckle by pressing the red harness buckle button. Fit the harness
around your child. To fasten the buckle; first fit the two upper sections together
(inset), then push them firmly into the lower section until you hear a positive
click. Gently pull the harness up to tighten the lap sections to fit. Pull the
adjuster strap forward making sure the harness is a comfortable but
around your child. Make sure the harness straps are not twisted.
IMPORTANT
1b
position for your child
pads must sit high on the child's shoulders as shown
9-25kg
The shoulder straps
child's shoulders. If in any doubt just below the shoulder
rather than above it
Once you reach the top slots your child may continue to use the seat until their
eye line is above the top of the seat shell.
Adjusting the Headrest
1c
Pull up the back plate and adjust the headrest by sliding the back plate higher
or lower
(dia
position.
(dia 1a)
BOTH
pull
shoulder straps forward as far as they will go.
– You must adjust the height of the shoulder straps to the correct
BEFORE
installing the child seat in a car. The shoulder
(dia
MUST
be adjusted so that they are level or just below your
(dia
1b).
1c). Make sure that the back plate snaps into the the desired
FIRM
fit
1b).
9-25 kg
Advertisement
