Table of Contents
Advertisement
Lap
LIGHT button
Pressing the lap button during data measurement records lap time/average, split
time/trip distance, average lap heart rate, and average lap cadence for up to 199 inter-
vals.
Recorded lap data can be recalled on the lap viewing screen. (See page 26.)
Backlight
Pressing the LIGHT button illuminates the displays for about three seconds.
LAP
LAP button
Second measurement
Main measurement
The second measurement is another measuring method, different from the main
2
MODE-
measurement described on page 16.
(2 sec.)
A second elapsed time, trip distance, and average speed can be recorded indepen-
dently of the main measurement.
Second measurement
• How to switch to the second measurement:
TM-
DST-
When the MODE-2 button is pressed for two seconds, Display-5 switches to the
DST-
second measurement screen with the elapsed time "TM-2" displayed on the top
2
MODE-
AVS-
and the trip distance "DST-2" displayed at the bottom.
Second
measurement icon
Each press on the MODE-2 button switches the bottom display between the elapsed
distance DST-2 and the average speed AVS-2.
Starting /stopping
When the MODE-2 button is pressed for two seconds, the system returns to the
the second
main measurement.
measurement
S/S/E
• Starting /stopping the second measurement
With the second measurement icon illuminated, press the START/STOP/ENTER
button to start or stop measurement.
18
CC-TR100
Resetting operation
Follow the directions below for resetting selected data to zero.
NOTE:
You cannot perform the resetting operation on the lap screen.
1. Resetting all measured items of data
To zero all data except for "TTm (total time)," "Odo (total distance)," "date"
1
2
MODE-
MODE-
LAP
and "time," and including the lap data and time in the heart rate and cadence
zones, simultaneously press the START/STOP/ENTER, MODE-1 and MODE-2
S/S/E
buttons.
NOTE: When resetting is required to change the settings on the menu screen,
2. Resetting the main measurement data
Main
To zero the main measurement data except for "TTm (total time)," "Odo (total
measurement
1
MODE-
display
LAP
distance), "date" and "time," and including the lap and the time in the heart
rate zone and cadence zone, simultaneously press the START/STOP/ENTER
S/S/E
and MODE-1 buttons while the main measurement is displayed.
3. Resetting the second measurement data
To reset to zero all erasable data in the second measurement display only,
Second
1
MODE-
measurement
LAP
simultaneously press START/STOP/ENTER and MODE-1 while the second
display
measurement icon is on.
S/S/E
Power-saving function
Power-saving
When the computer has not received any data for 10 minutes, the main unit will
state
enter the power-saving mode, in which only the clock is displayed (note illustra-
(after 10
minute idle)
tion).
When the computer receives a speed or cadence signal, or any of the buttons is
pressed, the power-saving mode is cancelled, and the normal display returns.
NOTE: The power-saving mode is not cancelled if the computer receives a heart
rate signal.
reset all measurements.
19
CC-TR100
Advertisement
Table of Contents
