Introduction Thank you for purchasing the CATEYE CC-TR100. The CC-TR100 is a high-performance computer for riders who wish to train extensively and analyze their data. It features wired speed and cadence, and coded wireless heart rate for minimal interference with other external signals. The computer can store up to 150 hours of computer downloadable data through the use of an optional download kit.
Introduction ........1 Lap function ........26 guides: About the manuals ......2 Data storage function ....27 Proper use of the CatEye CC-TR100 Configuring main unit ....... 28 Basic installation and operation See page 8 -19............4 Wheel selection ...... 28 / 29...
Proper use of the CatEye CC-TR100 Description of computer and its parts Observe the following instructions for safe usage. Main unit Warning!!! Display-1 (Speed) • Pace maker users should never use this device. Display-2 (Heart rate) • Do not concentrate on the data while riding. Always be sure to ride safely.
Factor of 10 - Displayed when total pedal count exceeds 9999. l Wheel selection icon Indicates the wheel currently selected. In order to use this function, the optional power unit must be installed. In order to use this function, the optional download kit or power unit is required. CC-TR100 CC-TR100...
Left chain stay all the way from side to side with- The smooth side of the zip out pulling the wire. Sensor side tie should be on the outside CC-TR100 CC-TR100...
Main unit set-up Installing the remote buttons To use the CC-TR100, follow the steps below to set up the main unit. Select the positions to mount the remote buttons according to your bicycle type. CAUTION ! : • Install the remote button so that it does not interfere with shift or brake 1.
• In the initial setup, the MODE-1 and MODE-2 button functions have been speci- fied. To change the settings, see “Defining remote button setting” on page 33. Completion of initial set-up When the setup is completed, set the date and time as described in “Configuring main unit” on page 28. CC-TR100 CC-TR100...
• If the icon does not flash, move the electrode pad little by little to find the optimum position for the heart rate reception. Dryness may make measurement difficult. Moistening the electrode pad allows easier measurement. CC-TR100 CC-TR100...
Pressing MODE-2 switches the data on Display-5. TM-1 Elapsed Time Clock DST-1 AVS 1 Trip Distance Average Speed MODE- MODE- MODE- DATE Total Time Date MODE-2 button Total Distance Maximum Speed START / STOP / ENTER MODE- button CC-TR100 CC-TR100...
When the computer receives a speed or cadence signal, or any of the buttons is pressed, the power-saving mode is cancelled, and the normal display returns. NOTE: The power-saving mode is not cancelled if the computer receives a heart rate signal. CC-TR100 CC-TR100...
Maximum cadence Indicates the maximum cadence. Measuring range: 0 (20) to 299 rpm MODE- MODE- 2 Sec. Pedal Count Total Indicates the total pedal count. When the count exceeds 9999, the “x10” appears; Measuring range: 0 to 99990 rotations CC-TR100 CC-TR100...
Appears during the lap recording (for about five seconds) and the viewing of lap data. Measuring range: 0.0 to 999999 (six 9’s) km [mile] *1: When the optional power unit is used, power-related data is displayed. For details, see the instruction manual for the power unit. CC-TR100 CC-TR100...
Alert when both heart rate and cadence go out of respective zones NOTE: When both the heart rate and the cadence are turned on and go out of the respective zones, the heart rate and cadence values flash. Beep! Beep! Beep! CC-TR100 CC-TR100...
Lap time and split time START The lap time indicates the time elapsed between two consecutive pressings of the LAP button. Lap time The split time indicates the total elapsed time from the start of the exercise. Split time CC-TR100 CC-TR100...
Data storage *4 Data file *4 Heart rate sensor ID Heart rate zone Cadence zone button setting See page 41 See page 39 See page 38 See page 36 See page 34 See page 33 Auto-mode menu screen CC-TR100 CC-TR100...
NOTE: Before changing units, you must stop the bicycle and reset all measured data. Speed unit menu screen K : km/h M : mph 1 or MODE- MODE- S/S/E S/S/E Select MODE- MODE- Defining remote button setting menu screen CC-TR100 CC-TR100...
Heart rate sensor reset button Number of laps used Ride time ID standby screen Alternating data display Ride start time S/S/E Cancel Data file check screen MODE- MODE- MODE- MODE- Data storage menu screen Data file menu screen CC-TR100 CC-TR100...
Deleting all data files MODE- Message to confirm deletion of all data files. S/S/E Select MODE- S/S/E Remaining hours of storage available Select recording interval Turn data storage on or off Data storage(On/Off) MODE- MODE- PC link menu screen CC-TR100 CC-TR100...
This menu can only be MODE- MODE- used when the optional power unit is in- stalled. For details, see the instruction manual for the power unit. Online power measurement Power menu screen or Wheel circumference menu Power select menu screen screen CC-TR100 CC-TR100...
Your resting heart rate is usually the lowest recorded rate soon after waking up in the morning. • Maximum heart rate The following calculations are generally used: (220 - age) or (204 - 0.69 x age). For more precise figure, consult a training specialist. TARGET TARGET ZONE ZONE CC-TR100 CC-TR100...
Is the electrode pad being worn correctly? If a malfunction occurs, check the following before contacting CatEye or your retailer for repair or service. To wear the electrode pad correctly, follow the instructions for wearing the heart rate sensor (page 14).
• The fastening belt absorbs sweat easily, and leaving it as such is unsanitary. Wash with a neutral detergent. Including: e-Train Data Data Ver.3 • Regularly check that the positions of the magnets and sensors are correct. (Windows 98/ME/2000/XP compatible) CC-TR100 CC-TR100...
0.0(4.0) - 199.9 km/h [0.0(3.0) - 125.0 mph] For warranty service you must register your product. Please register your TR100 as soon as For 27-inch tire size possible. CATEYE provides you technical support and new product information as much as Lap number 1 - 199 possible.
The warranty service will be performed directly by the 14 x 1.75 1055 26 x 2.00 2055 CATEYE CO., LTD.. When sending in a warranty item, please enter your name, address and 16 x 1.50 1185 2068 26 x 2.10 date of purchase on the warranty card along with a description of the problem.