Mounting the computer Mount the bracket Correct When mounting the bracket on a handle- Wrong bar, adjust the angle of the bracket so that the back of the computer faces the speed sensor when the computer is attached. CAUTION:...
Page 3
Mounting the computer Mount the speed sensor Mount the speed sensor in a posi- tion where the distance from the computer to the speed sensor is within the signal range. Mount the magnet To sensor zone...
Page 4
Mounting the computer Adjust the speed sensor and the magnet The magnet passes through The clearance between the the speed sensor zone. speed sensor and the magnet is within 5 mm (3/16”). Sensor zone Attach/detach computer Click Test operation...
Setting up the computer When using the computer for the first time or resetting it to its factory default settings, clear all computer data following the procedure below. MODE MENU MODE MODE Clear all data. Select the measurement unit. km/h ↔ mph km/h MODE MENU...
Page 6
Setting up the computer Set the clock. MODE MODE MODE Press MENU to complete setup. MENU...
Starting measurement [Measurement screen] Night mode icon Sensor signal icon Current speed Pace arrow Measurement unit Current function Switching current function MODE MODE MODE Elapsed Time Trip Distance Average Speed (*1) MODE MENU MODE MENU Clock MODE MODE MODE Total distance Calorie Consumption (*2) Maximum Speed *1 Av...
Changing settings [Menu screen] MENU MENU Night mode MENU Change setting ON ↔ OFF MODE MODE MODE MODE “Start Time” setting Confirm MODE MENU MODE MODE “End Time” setting MODE MODE ON ↔ OFF MENU MODE MODE MODE “Start Time” setting MODE MODE MODE...
Page 11
Changing settings [Menu screen] Tire size selection MENU Change setting MODE Simple setting MODE Inch 24" 700c 22" Confirm 27" 20" MODE MENU 27.5" 18" MODE 29" 16" Advanced settings L = 100 – 299 cm MODE MENU MODE MODE MODE MODE MODE...
Appendix Maintenance Replacing the battery CR2032 CR2032 Troubleshooting The sensor signal reception icon does not flash. (Speed is not displayed.) The display remains blank when the button is pressed. Incorrect data appear.