HP ProCurve 6200yl Multicast And Routing Manual page 8

Contents
vi
Configuration Steps for PIM-SM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
Planning Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
Per-Router Global Configuration Context . . . . . . . . . . . . . . . . . . . . . . 4-20
Per-VLAN PIM-SM Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21
Router PIM Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
Configuring PIM-SM on the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
Global Configuration Context for Supporting PIM-SM . . . . . . . . . . . 4-26
Global Configuration Context Commands . . . . . . . . . . . . . . . . . . 4-26
Example of Configuring for PIM Support at the Global Level . . 4-27
VLAN Context Commands for Configuring PIM-SM . . . . . . . . . . . . . . 4-28
Enabling or Disabling IGMP in a VLAN . . . . . . . . . . . . . . . . . . . . . 4-28
Enabling or Disabling PIM-SM Per-VLAN . . . . . . . . . . . . . . . . . . . 4-29
Changing the Interval for PIM-SM Neighbor Notification . . . . . 4-30
Changing the Randomized Delay Setting for
PIM-SM Neighbor Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
Changing the PIM-SM Neighbor Timeout Interval . . . . . . . . . . . . 4-31
Enabling or Disabling LAN Prune Delay . . . . . . . . . . . . . . . . . . . . 4-32
Changing the LAN-Prune-Delay Interval . . . . . . . . . . . . . . . . . . . . 4-33
Changing the DR (Designated Router) Priority . . . . . . . . . . . . . . 4-33
Example of Configuring PIM-SM Support in a VLAN Context . . 4-34
Router PIM Context Commands for Configuring PIM-SM Operation 4-35
Configuring a BSR Candidate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35
Configuring Candidate-RPs on PIM-SM Routers . . . . . . . . . . . . . 4-37
Enabling, Disabling, or Changing Router PIM
Notification Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41
Changing the Global Join-Prune Interval on the Router . . . . . . . 4-42
Changing the Shortest-Path Tree (SPT) Operation . . . . . . . . . . . . . . . 4-42
Statically Configuring an RP To Accept Multicast Traffic . . . . . . . . . 4-42
Example of Configuring PIM-SM Support in the
Router PIM Context . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-43
Displaying PIM-SM Data and Configuration Settings . . . . . . . . . . . 4-46
Displaying Multicast Route Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-47
Listing Basic Route Data for Active Multicast Groups . . . . . . . . 4-47
Listing Data for an Active Multicast Group . . . . . . . . . . . . . . . . . 4-48
Listing All VLANs Having Currently Active PIM Flows . . . . . . . . 4-50