Ip Interface Parameters For Routing Switches - HP ProCurve 6200yl Multicast And Routing Manual

Table 5-2. IP Interface Parameters – Routing Switches
Parameter Description
IP address A Layer 3 network interface address; separate IP
addresses on individual VLAN interfaces.
Metric A numeric cost the router adds to RIP routes learned
on the interface.
routes.
ICMP Router Locally overrides the global IRDP settings. See table 5-
Discovery 1 on page 5-7 for global IRDP information.
Protocol (IRDP)
IP helper address The IP address of a UDP application server (such as a
BootP or DHCP server) or a directed broadcast
address. IP helper addresses allow the routing switch
to forward requests for certain UDP applications from
a client on one sub-net to a server on another subnet.
*
Refer to the chapter titled "Configuring IP Addressing" in the Management and Configuration Guide for your routing
switch.

IP Interface Parameters for Routing Switches

5-2 lists the interface-level IP parameters for routing switches.
This parameter applies only to
Default
None configured
1 (one)
RIP
Disabled
None configured
IP Routing Features
Overview of IP Routing
See page
*
5-24
5-75
5-92
5-9