Displaying The Current Rp Set - HP ProCurve 6200yl Multicast And Routing Manual

Procurve series switch
Hide thumbs Also See for ProCurve 6200yl:
Table of Contents

Advertisement

ProCurve(config)# show ip pim rp-set
Status and Counters - PIM-SM Static RP-Set Information
Group Address
--------------- --------------- --------------- --------
231.100.128.255 255.255.255.255 100.10.10.1
Status and Counters - PIM-SM Learned RP-Set Information
Group Address
Group Mask
--------------- --------------- --------------- --------- --------------
231.100.128.0
232.240.255.252 255.255.255.252 100.10.10.1
237.255.248.1
239.10.10.240
239.10.10.240
Figure 4-22. Listing Both the Learned and Static RP-Set Data

Displaying the Current RP Set

The BSR sends periodic RP updates to all Candidate RPs in the domain. These
updates include the set of multicast group data configured on and reported
by all Candidate-RPs in the domain. This data does not include any static-RP
entries configured on any router in the domain. (To view the static RP-set
information for any static-RPs configured on a particular router, you must
access the CLI of that specific router.)
Syntax: show ip pim rp-set [ learned | static ]
Without options, this command displays the multicast group
support for both the learned (elected) Candidate-RP
assignments and any statically configured RP assignments.
learned: Displays only the elected Candidate-RP assignments
the router has learned from the latest BSR message.
static: Displays only the statically configured RP
assignment(s) configured on the router.
Grou
p Mask
RP Address
RP Address
255.
255.240.0
100.1
255.
255.255.255 100.10.10.1
255.
255.255.240 120.10.10.2
255.
255.255.252 120.10.10.2
Displaying PIM-SM Data and Configuration Settings
Override
Yes
Hold Time Expire Time
0.10.1
150
150
150
150
150
The Learned RP-set is received from the BSR and
includes an aggregation of reports it has received
from all accessible candidate-RPs in the domain.
PIM-SM (Sparse Mode)
The static RP-set
applies only to the
current routing switch.
The Yes override
indicates that the static-
RP has precedence
over any Candidate-RP
routers for supporting
the indicated group..
92
92
92
92
92
4-61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 5400zlProcurve 3500yl

Table of Contents